Model: 0101-0237

STEP 1. Remove all contents from the received box and check stainless steel tube for any dent. Also verify all brackets and bolts against the parts list.

STEP 2. Read installation manual and installation drawing completely. Understand all brackets and bolts before installation.

STEP 3. Install front mount bracket and rear mount bracket with M12-1.75 X 120MM hex head bolts and washers.

STEP 4. Fasten step bar to mount brackets with M14 hex head bolts and washers. Check to be sure step bar is properly aligned with the truck. Tighten and torque all bracket bolts to 65ft.lbs.