Model: 0102-0441

STEP 1. Remove all contents from the received box and check stainless steel tube for any dent. Also verify all brackets and bolts against the parts list.

STEP 2. Read installation manual and installation drawing completely. Understand all brackets and bolts before installation.

STEP 3. Remove original front and rear body mount bolt. Install front mount bracket using M12-1.75x110mm hex bolt with flat and lock washers. Install rear mount bracket using M12-1.75 x 120mm hex bolt with flat and lock washers as shown.

STEP 4. Fasten step bars to front and rear bracket using M-14 bolts as shown. Torque M14 bolts to 35-45 ft-lbs and M12 bolts to 35-45 ft-lbs.