Model: 0303-0084

STEP 1. Remove all contents from the received box and check stainless steel tube for any dent. Also verify all brackets and bolts against the parts list.

STEP 2. Read installation manual and installation drawing completely. Understand all brackets and bolts before installation.

STEP 3. Insert M8 “U” nut in truck body as shown.

STEP 4. Install front and mount brackets by using M8 bolts set on both driver and passenger side as shown.

STEP 5. Install step bar onto mounting brackets using M14 bolt set at front and using M!0 Allen head bolt set at rear as shown.
Torque M14 bolts to 60-65 ft-lbs. Torque M10 & M8 bolts to 25-30 ft-lbs.